Infrared emitters transmit large quantities of energy in a short time with high efficiency. Heating and drying paint on various substrates can be made very fast.
TRIAB has developed a special IRM Booster concept to create higher capacity, quality and economy in existing paint lines where the oven system is the bottle neck.
The TRIAB IRM Booster is built inside the existing convection oven, which results in a faster heat up of the painted parts and a faster line speed with better control of the process. This is achieved without extending the length of the existing oven.
The new process with the IRM Booster will be verified in our technical centre using your products and the actual paint system.
TRIAB has increased the capacity and the product quality for many customers during the years for wet and powder paint applied on all types of products and substrates. This method gives a quick return of the investment.
Examples of IRM Booster Systems and processes
Various steel parts 1-10 mm curing polyester powder on steel parts. Increase of line speed from 1.5 to 2.5 m/min with only 2 meters Booster inside the existing convection oven.
Hot water boilers water drying after pre-treatment. Increase of line speed from 2 to 3 m/min with only 2 meters Booster inside the existing convection oven.
Various steel parts 1-5 mm subcontractor curing and drying various wet paint systems on steel parts. Increase of capacity, flexibiliy and quality with 2 meters Booster inside the existing convection oven.
Steel roof constructions curing of water based primer. The IRM-Booster increase the forced drying of the paint and makes it possible to handle the parts at the unload station without damages.
Waterspout parts curing polyester powder on various parts. Increase of line speed from 1 to 3 m/min with only 1 meter Booster inside the existing convection oven.